FIRE SAFES

FIRE-RESISTANT SAFES ARE CHARACTERIZED BY THE FOLLOWING CRITERIA:

The selection of fireproof safes is large. Find the right fire safe with us. Cabinets with fire protection are characterized by:

• Fireproof storage of valuables
• For private and commercial use (protects folders and / or data carriers)
• Recommendation for the General Data Protection Regulation?

A fireproof safe optimally protects your valuables, documents, A4 files, contracts or certificates from a possible fire.

With us you will find fire protection safes which, thanks to the high-quality materials used, offer protection from heat and moisture, for your papers or for your data. In our large product range you will find all the security solutions you want, which are adapted to your individual needs. Available with an electronic lock, a mechanical combination lock and a double-bit security lock.

There is a certified fire protection for the different categories of safes: medicine safes, data safes, document cabinets, handgun safes, furniture safes, key safes, protective cassettes, wall safes and safes.

FIRE PROTECTION / FIRE PROTECTION CLASSES FOR THE SAFE

The fire test takes place independently of the burglary protection test; this is also documented by an extra badge. A badge (certificate) from an approved institute is affixed to the inside of the door; The buyer should only orient himself by these badges.

The test takes place using the standard temperature-time curve (ETK) with a maximum at 1080 ° C for 60 (S 60) or 120 (S 120) minutes; including heating and cooling phase. The stay in the furnace lasts several hours. A drop test is part of the test - the hot safe is dropped into a gravel bed from a height of 9.15 m.

FIRE PROTECTION IN ACCORDANCE WITH EN 1047-1

A safe is tested for suitability for fire in a special procedure by the official materials testing institute for construction (MPA) in Braunschweig. A special fire test room is used in which the safes are subjected to a fire test in combination with a fall test. Many well-known testing institutes, such as VdS; ECB-S etc., use this fire protection test EN 1047-1 from the MPA in Braunschweig and certify their products such as the gun cabinet or safe with it.

The "Braunschweig Test" is divided into 2 parts and there are always two identical cabinets are used.

In part 1, the safe, safe or gun cabinet must pass a fire resistance test. The max. permitted temperature increases in this period of time inside the cabinet are not exceeded.

In part 2, a burst of fire and fall test must be passed. The safe, gun cabinet is heated to 1090 ° C within 30 minutes. A fall test from a height of 9.15 meters onto a gravel or ballast bed is then carried out within 4 minutes. After the drop test, the safe, safe or gun cabinet is heated again to 840 ° C for 30 minutes. The cabinet then remains in the fire room until it has clearly cooled down.

FIRE PROTECTION ACCORDING TO EN 15659 BG FOR THE SAFE

LFS 60P 1 hour for paper

OTHER FIRE PROTECTION CLASSES FOR THE SAFE

• Fire protection level according to EN 1047-1
• UL fire test (Underwriters Laboratories), American, independent and leading test laboratory)

There are a large number of standards and guidelines for this UL test.

• NT Fire 017 - Swedish fire test

90 min. Endurance test at temperatures up to 1000 ° C. Thereafter the temperature inside is max. 150 ° C, well below 177 ° C, the critical point for paper.

• S 60 DIS - 1 hour for data carriers
• S 120 DIS - 2 hours for data carriers
• ETL - water resistance 1 hour

1 hour completely submerged no more than 0.5 grams (8 drops) of water ingress.